Installation Guide | Mosaic Marble
Home » Installation Guide
 
Installation Guide
 

 

Installation Guide

Each mosaic is quick and simple to install and does not require special tools or skills.

Installation

The mosaic piece is supplied directly from the factory, glued to a fiber mesh backing, ensuring that each of the hand-cut marble mosaic tiles remains firmly in place during shipment.  Our mosaics are made from hand-cut mosaic tiles and each tile is 3/8 inch deep and approximately  1/3 wide.
Our mosaics are made from natural colored marble, granite and other natural stones, making them so resistant to any weather condition.

We ship our mosaic pieces rolled like a rug so all you need to do is unroll it upon unpacking.
 
Installation of the mosaic is carried out in a similar manner as installing standard ceramic tiles. Although there is no need for the mosaics to be installed by a professional we would recommend this for larger mosaics.
 
To install it upon the wall or on the ceiling, you can glue it to a wood panel and fix the wood panel to the wall.
 

  • STEP 1
    Remove the paper backing from the mosaic and gently remove any excess glue.
     
  • STEP 2
    Install Floor or Wall Tile Adhesive to the area in which the mosaic is to be installed.
     
  • STEP 3
    Place and level the mosaic into the Tile Adhesive, utilizing a wooden block to even the level of the mosaic tiles.
     
  • STEP 4
    After 24hrs, apply Tile Grout to the mosaic, removing any excess grout with a damp cloth prior to drying.
     
  • STEP 5
    Once the Tile Grout is dry, apply a Marble Tile Sealant (available from most leading DIY stores) to the mosaic to seal the marble and bring out the unique characteristics of each tile.
     
  • STEP 6
    Enjoy the life-long beauty of your very own Mosaic Marble!

 

 
Back